Đối tác chiến lược ngành in bạt quảng cáo

in decal pp

Chung cư A1CT2 Tây Nam Linh Đàm | Chung cư B1B2 CT2 Tây Nam Linh Đàm | Chung cư D2CT2 Tây Nam Linh Đàm | Chung cư VP2VP4 Bán đảo linh đàm | Chung cư HUD3 Nguyễn Đức Cảnh | Chung cư New Skyline Văn Quán

Đối tác chiến lược ngành in bạt quảng cáo

in bạt hiflex - in decal ngoài trời - in băng rôn

Viện Bơm và Thiết bị thuỷ lợi

Đối tác chiến lược Tư vấn thiết kế nội thất

thiết kế nội thất văn phòng - thiết kế nội thất chung cư

Đệm | Đệm giá rẻ | Đệm lò xo | Đệm Sông Hồng | Đệm Sông Hồng | Đệm Everhome | Đệm mút | Đệm mút cứng | Đệm Queensweet | Đệm Liên á | Đệm Korea

Horizontal axial flow pump with spiral casing HT3600-5

Horizontal axial flow pump with spiral casing HT3600-5

HT3600-5 pump is a axial flow pump with spiral casing (without guide vane) made for the first time in Vietnam combining the axial flow impeller blade type with the casing which connects to the discharging pipe is spiral.

The main parameters of the pump: Capacity Q = 3600 m3 / h, Total head H = 5 m, motor power N = 75 kW, pump efficiency reaches 76%;

Origin and author:

- HT3600-5 is a product of the project: "Research and improve pump stations of 4000 m3 / h horizontal axis flow pump" under the Ministry-level independent project (Plan 2006 - 2008). Project manager: Ph.D Pham Van Thu

- State-level project: "Completing the design and manufacture technology of the horizontal axial flow pumps with structure of spiral casing type HT 3600-5". Project leader: MA. Do Hong Vinh

Economic and technical efficiency:

Due to the special structure, the pump has many advantages compared to the old type horizontal axial flow pump such as: good stability, high durability, in addition, do not use rubber silver or non-metallic silver, so reduce friction At the shaft neck increases the efficiency of the unit.

This type of pump is a good replacement for the old horizontal axial flow pump type 4000 m3 / h (type 24HT-90). The replacement will be very economical because this pump uses the exhaust system, suction and motor of the old pump;

In addition to the uncountable social and economic effects, the replacement of each new pump will bring about an annual effect of VND 21.19 million.

On the other hand, this is also the type of pump that can be applied in general because of the advantages such as: simple structure, easy to fabricate, install, repair; Inexpensive cost for the station construction. Expected series products cost VND 235 million.

Pump HT3600-5 at The Dang Xa pumping station - Bac Ninh

Pump HT3600-5 besides pump 24HT-90

Area of ​​application:

- Installed at some pumping stations such as Van Duc - Hai Duong, Thai Da - Hanoi, Bui Ha - Nam Dinh, Dang Xa - Bac Ninh;

- Proposing for mass deployment to replace 24HT-90 pump (4000m3 / h horizontal axial flow pump) and 12LTx-40 pump (1000m3 / h horizontal axial flow pump) in the provinces of Bac Ninh, Bac Giang, Vinh Phuc, Hung Yen , Hai Duong, Hai Phong, Nam Ha, Nam Dinh, Thai Binh, Thanh Hoa, Nghe An, Ha Tinh, Thua Thien Hue and provinces in the Southern Delta with suitable water column.


You are here  : Home Scientific and technological products Horizontal axial flow pump with spiral casing HT3600-5
Đối tác chiến lược bất động sản,chung cư đang mở bán HOT:

chung cư 89 phùng hưng - chung cu mỹ sơn tower - chung cư văn phú